User Manual

130
Users Manual of XGS-6350-24X4C
Figure 4: Displaying the static route
Click Create to add a static route.
If you click Edit, you can modify the current static route.
If you click Cancel, you can cancel the chosen static route.
Figure 5: Setting the static route
7.6.3 IGMP Proxy
7.6.3.1 Enabling the IGMP Proxy
If you click Layer-3 Config -> IGMP proxy, the IGMP proxypage appears.
Figure 6: Enabling the IGMP agent
On this page you can enable or disable the IGMP proxy. It is noted that the IGMP proxy can be enabled or
disabled on a switch only after the IP IGMP-snooping function is enabled on the switch.
7.6.3.2 Setting the IGMP Proxy
If you click Layer-3 Config -> IGMP proxy-> IGMPproxy Config, the IGMP proxy configuration page appears.
Click New to create a new IGMP agent.
Figure 7: Setting the IGMP agent