User Manual

160
Users Manual of XGS-6350-24X4C
Chapter 13. Configuring MAC Address Attribute
MAC Address Configuration Task List
13.1
 Configuring Static Mac Address
 Configuring Mac Address Aging Time
 Configring VLAN-shared MAC Address
 Displaying Mac Address Table
 Clearing Dynamic Mac Address
MAC address Configuration Task
13.2
13.2.1 Configuring Static Mac Address
Static MAC address entries are MAC address entries that do not age by the switch and can only be deleted
manually. According to the actual requirements during the operation process, you can add and delete a static
MAC address. Use the following command in privileged level to add and delete a static MAC address.
Command Purpose
configure Enters the global configuration mode.
[no] mac address-table
staticmac-addrvlan vlan-idinterface
interface-id
Adds/deletes a static MAC address
entry.
Mac-addr indicates the MAC address.
Vlan-id indicates the VLAN number.
Valid value is from 1~4094.
Interface-id indicates the interface
name.
exit Returns to EXEC mode.
write Saves configuration.
13.2.2 Configuring MAC Address Aging Time
When a dynamic MAC address is not used during the specified aging time, the switch will delete this MAC
address from the MAC address table. The aging time of the switch MAC address can be configured in terms
of needs. The default aging time is 300 seconds.
Configure the aging time of MAC address in the privileged mode as follows:
Command Purpose
configure Enters the global configuration mode
mac address-table aging-time [0 |
10-1000000]
Configures the aging time of MAC
address.