User Manual

18
Users Manual of XGS-6350-24X4C
Chapter 1. INTRODUCTION
Thank you for purchasing PLANET L3 100G Managed Switch, XGS-6350-24X4C. The description of this
model is as follows:
XGS-6350-24X4C Layer 3 24-Port 10G SFP+ + 4-Port 100G QSFP28 Managed Switch
The term “Managed Switch” mentioned in this user’s manual refers to the XGS-6350-24X4C.
Packet Contents
1.1
Open the box of the Managed Switch and carefully unpack it. The box should contain the following items:
 The Managed Switch
x 1
 Quick Installation Guide
x 1
 Power Cord
x 1
 RJ45-to-DB9 Console Cable
x 1
 Rubber Feet
x 4
 Two Rack-mounting Brackets with Attachment
Screws x 6
x 1
 SFP Dust Caps (installed on the machine)
x 28
If any of these are missing or damaged, please contact your dealer immediately; if possible, retain the carton
including the original packing material, and use them again to repack the product in case there is a need to
return it to us for repair.
Powerful 100Gbps Solution for All Long-Reach Networks
PLANET XGS-6350-24X4C is a high performance Layer 3 Managed Switch that meets the next generation
Metro, Data Center, Campus and Enterprise network requirements. It has high-density 24 10G SFP+ and 4
40G/100GbE QSFP28 fiber interfaces delivered in a 1RU rugged case.
The XGS-6350-24X4C comes with the complete Layer 3 managed function with comprehensive protocols
and applications to facilitate the rapid service deployment and management for both the traditional L2 and L3
networks. With support for advanced features, including RIP, OSPF, BGP, PIM-DM/SM, etc., this switch is
ideal for the traditional or fully virtualized data center.
The administrator can flexibly choose the suitable transceivers according to the transmission distance or the
transmission speed required extending the 1G/10G/40G/100G network efficiently. Besides, with 800Gbps