Manualshelf

User Manual

ManualsBrandsPLANET Technology ManualsLAN SwitchesLayer 3 24-Port 10G SFP+ + 4-Port 100G QSFP28 Managed Switch
31323334353637383940
35
Users Manual of XGS-6350-24X4C
SFP/SFP+ transceiver is operating correctly.
4. Check the Link mode of the SFP/SFP+ port if the link fails. To function with some fiber-NICs or media
converters, user has to set the port Link mode to “10GForce” or “1000M Force”.
Remove the Transceiver Module
1. Make sure there is no network activity anymore.
2. Remove the Fiber-optic Cable gently.
3. Lift up the lever of the MGB module and turn it to a horizontal position.
4. Pull out the module gently through the lever.
Figure 2-5: How to Pull Out the SFP/SFP+Transceiver
Never pull out the module without lifting up the lever of the module and turning it to a
horizontal position. Directly pulling out the module could damage the module and the
SFP/SFP+ module slot of the Managed Switch.