Manualshelf

User Manual

ManualsBrandsPLANET Technology ManualsLAN SwitchesLayer 3 24-Port 10G SFP+ + 4-Port 100G QSFP28 Managed Switch
31323334353637383940
38
Users Manual of XGS-6350-24X4C
Figure 3-3 Opening HyperTerminal
3) In the “Connect using” drop-list, select the RS-232 serial port used by the PC, e.g., COM1, and click “OK”.
Figure3-4 Opening HyperTerminal
4) COM1 property appears and select “9600” for “Baud rate”, “8” for “Data bits”, “none” for “Parity checksum”,
“1” for stop bit and “none” for traffic control; or you can also click “Restore default” and click “OK”.