User Manual

392
Users Manual of XGS-6350-24X4C
43.3.3.7 Configuring DHCP server address pool
Run the following command in global configuration mode to add the address pool for the DHCP server:
Run... To...
ip dhcpd pool name
Add the address pool of the DHCP
server and enter the configuration
mode of the DHCP address pool.
43.3.3.8 Configuring DHCP server address pool
You can run the following commands in DHCP address pool configuration mode to configure related
parameters.
Run the following command to configure the network address of the address pool which is used for automatic
distribution.
Run... To...
network ip-addr netsubnet
Configure the network address of
the address pool which is used for
automatic distribution.
Run the following command to configure the address range that is used for automatic distribution.
Run... To...
range low-addr high-addr
Configure the address range that is
used for automatic distribution.
Run the following command to configure the default route that is distributed to the client:
Run... To...
default-router ip-addr …
Configure the default route that is
distributed to the client.
Run the following command to configure the DNS server address that is distributed to the client:
Run... To...
dns-server ip-addr …
Configure the DNS server address
that is distributed to the client.
Run the following command to configure domain that is distributed to the client:
Run... To...
domain-namename
Configure domain that is distributed
to the client.
Run the following command to configure the lease time of the address that is distributed to the client: