User Manual

46
Users Manual of XGS-6350-24X4C
Switch> enter
Password: <enter password>
Switch# config
Switch_config# interface f0/1
Switch_config_f0/1# quit
Switch_config# quit
Switch#
3.1.3 Help Function
Use the question mark (?) and the direction mark to help you enter commands:
 Enter a question mark. The currently available command list is displayed.
Switch> ?
 Enter several familiar characters and press the space key. The available command list starting with the
entered familiar characters is displayed.
Switch> s?
 Enter a command, press the space key and enter the question mark. The command parameter list is
displayed.
Switch> show ?
 Press the “up” key and the commands entered before can be displayed. Continue to press the “up” key
and more commands are to be displayed. After that, press the “down” key and the next command to be
entered is displayed under the current command.
3.1.4 Canceling a Command
To cancel a command or resume its default properties, add the keyword “no” before most commands. An
example is given as follows:
no ip routing
3.1.5 Saving Configuration
You need to save configuration in case the system is restarted or the power is suddenly off. Saving
configuration can quickly recover the original configuration. You can run write to save configuration in
management mode or office configuration mode.