User Manual

470
Users Manual of XGS-6350-24X4C
Switch_config# ip exf
48.3.4 Configuring MCE-S2
Configures VRF:
Switch#config
Switch_config# ip vrf vpn1
Switch_config_vrf_vpn1# rd 300: 1
Switch_config_vrf_vpn1# route-target export 300: 1
Switch_config_vrf_vpn1# route-target import 300: 1
Switch_config_vrf_vpn1# exit
Switch_config# ip vrf vpn2
Switch_config_vrf_vpn2# rd 300: 2
Switch_config_vrf_vpn2# route-target export 300: 2
Switch_config_vrf_vpn2# route-target import 300: 2
Switch_config_vrf_vpn2# exit
Configure the loopback port and the physical port, and use the address of the loopback port as the router ID
of the BGP protocol.
Switch_config# interface loopback 0
Switch_config_l0# ip address 103.0.0.1 255.255.255.255
Switch_config_l0# exit
S2 connects S13 through the F0/1 port, S22 through the G0/3 port and PE through the G0/2 port.
Switch_config# interface gigaEthernet 0/1
Switch_config_g0/1# switchport pvid 41
Switch_config_g0/1# exit
Switch_config# interface gigaEthernet 0/3
Switch_config_g0/3# switchport pvid 46
Switch_config_g0/3# exit
Switch_config# interface gigaEthernet 0/2
Switch_config_g0/2# switchport mode trunk
Switch_config_g0/2# exit
Set the L3 VLAN port of a switch, bind the VRF to the VLAN port and set the IP address. S2 connects PE
through two logical ports, VLAN31 and VLAN32. The two ports, VLAN41 and VLAN46, connect VPN1 and
VPN2 respectively.