User Manual

519
Users Manual of XGS-6350-24X4C
above, run the following command in RIPng configuration mode:
Command Purpose
neighboripv6-address
Defines a neighboring router and
switches the routing information with
this neighboring router.
53.1.3.5 Applying the Offset on the Routing Weight
The offset list is used to add an offset for an incoming or outgoing route which RIPng learns. In this case, a
local mechanism is provided to add the routing weight. Additionally, you can also use the access list or an
interface to limit the offset list. To add the routing weight, run the following command in RIPng configuration
mode:
Command Purpose
offset｛[interface-type number]|* ｝
{in|out} access-list-name offset value
Adds an offset to a routing weight.
53.1.3.6 Filtering the Received or Transmitted Routes
Through settings the RIPng instance can filter the received or transmitted routes on the corresponding
interface, in which flexible configuration policies can be flexibly realized. Run the following command in RIPng
configuration mode:
Command Purpose
filterinterface-type interface-number
{in | out} access-list | gateway |
prefix-list
Filters the received or transmitted
routing information.
53.1.3.7 Setting the Management Distance
Trough setting the management distance, you can change the credibility of the route of RIPng instance. In
general, the bigger the value is, the more incredible the value is. To set the management distance, run the
following command in RIPng configuration mode:
Command Purpose
distance weight[ X: X: X: X: :
X/<0-128> [Acc-list_name]
Sets the management distance of the
RIPng instance's route.
53.1.3.8 Adjusting the Timer
The routing protocol needs several timers to judge the transmission frequency of routing updates and how
long it takes for a route to become invalid. You can adjust these timers to make the performance of a routing
protocol more suitable for the requirements of network interconnecting.
You can also adjust the routing protocols to speed up the convergence time of the IPv6 algorithm and make
fast backup of the redundancy router, guaranteeing a maximum breakup for a terminal user when quick