User Manual

71
Users Manual of XGS-6350-24X4C
Configuration mode: Interface configuration
When the local end sends I frame, it will wait for remote acknowledgement. If no
acknowledgement is received within a given time, the I-frame will be resent. The
relative big value should be set on the network where the data is transmitted at a
slow rate.
Example: Setting 12 seconds as the time value of waiting for acknowledgement.
int ethernet1/1
llc2 t1-time 12
5.2.3 Configuring Busy Time Value of Remote Terminal
Command Purpose
[no] llc2 tbusy-time [seconds]
Used for controlling the waiting time when the
remote end is busy. The command “no” can be
used for restoring to the default value.
Seconds The waiting seconds when the remote
end is busy. The maximum is 60 seconds, the
minimum is 1 second and the default is 10
seconds.
Configuration mode: Interface configuration
a LLC2 connective end is able to inform the
opposite end that local end is busy and
prevent the opposite end from sending data to local end by sending a RNR (receive
not ready) The relative big value can be set for averting the timeout.
Example: Setting 12 seconds as the busy time value of remote end.
int ethernet 1/1
llc2 tbusy-time 12
5.2.4 Configuring Time Value of Response
The command is used for controlling the time of waiting for the response of remote end. The command “no”
can be used for restoring to the default value.
Command Purpose
[no] llc2 tpf-time [seconds]
used for controlling the time of waiting for the
response of remote end. The command “no”
can be used for restoring to the default value.
Seconds : The seconds of waiting for the
response of remote end. The maximum is 60
seconds, the minimum is 1 second, and the