User Manual

79
Users Manual of XGS-6350-24X4C
defined at the time of configuring the maximum length of LLC2 information frame.
The command below can be used under interface configuration mode for configuring the maximum value of
SDLC information frame:
Command Purpose
sdlc sdlc-largest-frameaddress
size
Configuring the maximum length of information
frame that can be sent or received by the
designated SDLC station.
5.2.22 Monitoring SDLC Workstation
The command below can be used under management mode for monitoring the configuration of SDLC
workstation and deciding which SDLC parameter needs to be adjusted.
Command Purpose
show interfaces
Showing configuration information of SDLC
workstation.