Datasheet

XGS3-24042
2
Rich Multi-Layer and Multicast Networking Protocols
The XGS3 series supports IPv6/IPv4 routing protocols including Layer 3 IP Static
Routing, RIPv1/v2 (Routing Information Protocol), OSPF(Open Shortest Path First),
and VRRP(Virtual Router Redundancy Protocol) protocols. Built in with abundant
multicast features, the XGS3 series supports L3 multicast protocols -- DVMRP,
PIM-DM, PIM-SM and PIM-SSM. Offering the rich application experience, the
product supports multicast VLAN registration, multicast receive control and illegal
multicast source detect functions. The XGS3 series solution is cost-effective yet
has the ability to expand to meet today’s demand for network expansion.
High Performance 10Gbps Ethernet Capacity
The XGS3-24042’s built-in four SFP+ slots boast a high-performance switch
architecture that is capable of providing non-blocking switch fabric and wire-speed
throughput as high as 128Gbps, which greatly simplifies the tasks of upgrading
the LAN for catering to increasing bandwidth demands. Each of the SFP+ slots
supports Dual-Speed, 10GBASE-SR/LR or 1000BASE-SX/LX, meaning the
administratornowcanexiblychoosethesuitableSFP/SFP+ transceiveraccording
to the transmission distance or the transmission speed required to extend the
networkefciently.
Dual AC Redundant Power to Ensure Continuous Operation
The XGS3-24042 is equipped with two 100~240V AC power supply units for
redundant power supply installation. A redundant power system is also provided
to enhance the reliability with dual AC power supply units. The redundant power
system is specifically designed to handle the demands of high-tech facilities
requiring the highest power integrity.
IP Stacking Management
The XGS3-24042 supports IP stacking function that helps network managers to
easily configure up to 24 switches in the same series via one single IP address
instead of connecting and setting each unit one by one. PLANET XGS3 series
adopting the IP Stacking technology enables centralized management through a
single unit, regardless of the physical location or switch type, as long as they are
connected to the same local network.
• Supports auto-negotiation and half-duplex/full-duplex modes for
all 10BASE-T, 100BASE-TX and 1000BASE-T ports
• Auto-MDI/MDI-X detection on each RJ45 port
• Preventspacketlossowcontrol
– IEEE802.3xpauseframeowcontrolinfull-duplexmode
– Back-pressureowcontrolinhalf-duplexmode
• High performance Store-and-Forward architecture, broadcast
storm control, port loopback detect
• 16K MAC address table, automatic source address learning
and aging
• Supports VLAN
– IEEE 802.1Q tag-based VLAN
– GVRP for dynamic VLAN management
– Up to 256 VLANs groups, out of 4041 VLAN IDs
– Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported
– Private VLAN Edge (PVE) supported
– GVRP protocol for Management VLAN
– Protocol-based VLAN
– MAC-based VLAN
– IP subnet VLAN
• Supports Link Aggregation
– Maximum 12 trunk groups, up to 8 ports per trunk group
– IEEE 802.3ad LACP (Link Aggregation Control Protocol)
– Cisco ether-channel (static trunk)
• Supports Spanning Tree Protocol
– STP, IEEE 802.1D (Classic Spanning Tree Protocol)
– RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
– MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol,
spanning tree by VLAN)
– Supports BPDU & root guard
• Portmirroringtomonitortheincomingoroutgoingtrafcona
particular port (many to many)
• Provides port mirror (many-to-1)
Quality of Service
• 8 priority queues on all switch ports
• Supports strict priority and WRR (Weighted Round Robin) CoS
policies
• Trafcclassication
– IEEE 802.1p CoS/ToS
– IPv4/IPv6 DSCP
– Port-based WRR
• Strict priority and WRR CoS policies