Datasheet
XGS3-24042
1
24-Port Gigabit + 4-Port 10G SFP+
Layer 3 Stackable Managed Switch
IPv6 Routing and 10G Ethernet Switch Solutions for the Next Generation
Internet Protocol
PLANET XGS3-24042 Layer 3 Stackable Managed Gigabit Switch supports multi-
layer IPv6/IPv4 Gigabit Ethernet Routing, and provides 24 10/100/1000Mbps Gigabit
Ethernet ports, 4 shared Gigabit SFP slots and 4 extra 10G SFP+ uplink slots to meet
the bandwidth requirements and protect network investment for enterprises. The XGS3-
24042 is implemented with the following advanced technologies:
• IPv6/IPv4 Routing and Management
• 10G Ethernet Switching
• Single IP Address Management
• Redundant Power System
Positioned as the distribution or aggregation layer switch for large networks, the XGS3-
24042 supports IP Stacking technology that helps to manage and configure up to 24
units via one single IP address easily. It is suitable for campus networks, metropolitan
IP networks and other large infrastructures as it offers intelligent security features, high
performanceandexibility.TheXGS3-24042canalsobeanexcellentchoiceasacore
layer switch for enterprises, data centers or small- and medium-sized networks.
Physical Port
• 24-port 10/100/1000BASE-T RJ45 copper
• 4 100/1000BASE-X mini-GBIC/SFP slots, shared with Port-21
to Port-24
• 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-
SX/LX/BX SFP
• RJ45 to DB9 console interface for switch basic management
and setup
• 1 RJ45 Ethernet management port for switch basic
management and setup
• 1USB2.0forbackup/uploadcongurationandrmware
upgrade
IP Stacking
• Connects with stack member via both Gigabit TP/SFP
interface and 10G SFP+ slots
• Single IP address management, supporting up to 24 units
stacked together
IP Routing Features
• IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3,
BGP4/4+
• Routing interface provides per VLAN routing mode
• VRRPv1/v3 protocol for redundant routing deployment
• Supports route redistribution
Multicast Routing Features
• Supports PIM-DM (Protocol Independent Multicast – Dense
Mode) and PIM-SM (Protocol Independent Multicast – Sparse
Mode) and PIM-SSM (Protocol Independent Multicast –
SourceSpecicMulticast)
• Supports DVMRP (Distance Vector Multicast Routing Protocol)
• Supports IGMP v1/v2/v3 and MLD v1/v2
Layer 2 Features
• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,
IEEE 802.3z Gigabit Ethernet and IEEE 802.3ae 10Gb/s
Ethernet standard
• Supports auto-negotiation and half-duplex/full-duplex modes for
all 10BASE-T, 100BASE-TX and 1000BASE-T ports
1 x USB2.0
4 x Combo Interface
4 x 1/10G
SFP+ Slot
24 x 10/100/1000BASE-T
RJ45 Port
4 x 100/1000BASE-X
SFP Slot
RJ45 Type Console