Quick Guide

4
2. Switch Management
To set up the Managed Switch, the user needs to congure the Managed Switch
for network management. The Managed Switch provides two management options:
Out-of-Band Management and In-Band Management.
 Out-of-Band Management
Out-of-band management is the management through Console interface.
Generally, the user will use out-of-band management for the initial switch
conguration, or when in-band management is not available.
Important
The Managed Switch is shipped without IP address assigned by
default. User must assign an IP address to the Managed Switch via
the Console interface to be able to remotely access the Managed
Switch through Telnet or HTTP.
 In-Band Management
In-band management refers to the management by logging in to the Managed
Switch using Telnet or HTTP, or using SNMP management software to congure the
Managed Switch. In-band management enables the management of the Managed
Switch to attach some devices to the Switch. The following procedures are required
to enable in-band management:
1. Logon to console
2. Assign/Congure IP address
3. Create a remote login account
4. Enable HTTP or Telnet server on the Managed Switch
In case in-band management fails due to Managed Switch conguration changes,
out-of-band management can be used for conguring and managing the Managed
Switch.