User Manual

1-4
1.3 Product Features
 Physical Port
XGS3-24042
 24-port 10/100/1000BASE-T RJ45 copper
 4 100/1000BASE-X mini-GBIC/SFP slots, shared with Port-21 to Port-24
 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
XGS3-24242
 24-port 100/1000BASE-X mini-GBIC/SFP slots
 16 10/100/1000BASE-T RJ45 copper ports, shared with port-1 to port-16
 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
 2 20Gbps Hardware Stacking ports
 RJ45 to DB9 console interface for switch basic management and setup
 1 RJ45 Ethernet management port for switch basic management and setup
 1 USB 2.0 for backup/upload configuration and firmware upgrade
 IP Stacking
 Connects with stack member via both Gigabit TP/SFP interface and 10G SFP+ slots
 Single IP address management, supporting up to 24 units stacked together
 Hardware Stacking (For XGS3-24242)
 Connects with stack member via QSFP+ slots
 Supporting up to 6 units stacked together
 IP Routing Features
 IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3, BGP4/4+
 Routing interface provides per VLAN routing mode
 VRRPv1/v3 protocol for redundant routing deployment
 Supports route redistribution
 Multicast Routing Features
 Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol
Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source
Specific Multicast)
 Supports DVMRP (Distance Vector Multicast Routing Protocol)
 Supports IGMP v1/v2/v3 and MLD v1/v2
 Layer 2 Features
 Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet and IEEE
802.3ae 10Gb/s Ethernet standard
 Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and
1000BASE-T ports
 Auto-MDI/MDI-X detection on each RJ45 port