User Manual

2-3
XGS3-24242 LED Indication
Figure 2-1-4 XGS3-24242 LED panel
■ System
LED
Color
Function
PWR1/PWR2
Green
Lights to indicate that the Switch has power.
Off
Power is off.
SYS
Green
Lights to indicate the system diagnosis is completed.
Blinks to indicate power is off.
Mode
Green
Off to indicate the Ethernet LNK/ACT LED is displaying per port LNK/ACT
status
Blinks to indicate the Ethernet LNK/ACT LED is displaying unit stack ID status
within 45 seconds while pressing the Mode button
■ Ethernet Interfaces
LED
Color
Function
LNK/ACT
Green
Lights to indicate the link through that port is successfully established
Blinks to indicate that the switch is actively sending or receiving data over that
port.
Off
No flow goes through the port.
2.1.3 Switch Rear Panel
The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from
100 to 240V AC, 50-60Hz. Figure 2-1-5 shows the rear panel of these Managed Switches
XGS3-24042 Rear Panel
Figure 2-1-5 Rear panel of XGS3-24042