User Manual

2-4
XGS3-24042 Rear Panel with Selectable DC Supply
Figure 2-1-6 Rear panel of XGS3-24042 with selectable DC supply
XGS3-24242 Rear Panel
Figure 2-1-7 Rear panel of XGS3-24242
XGS3-24242 Rear Panel with Selectable DC Supply
Figure 2-1-8 Rear panel of XGS3-24242 with selectable DC supply
■ AC Power Receptacle
Compatible with electrical services in most areas of the world, the Managed Switch’s power supply
automatically adjusts to line power in the range of 100-240VAC and 50/60 Hz.
Plug the female end of the power cord firmly into the receptacle on the rear panel of the Managed Switch.
Plug the other end of the power cord into an electrical outlet and then the power will be ready.
■ Selectable DC Power Supply
The XGS3-24042 & 24242 support -40~60VDC power input, connect the power cable to the switch at the
input terminal block. Connect the power cable to the DC power supply. After power is up or reset, the
Managed Switch performs a cold start procedure.
Figure 2-1-9 -48V DC connector