User Manual

80-18
ldp label-retention-mode {conservative |
liberal}
Optional
Configure the label retention mode of the
interface; the default value is the same as
the global configuration. If the configuration
differs with the global one, the interface
configuration will take effect.
ldp advertisement-mode {downstream-
on-demand|downstream-unsolicited}
Optional
Configure the label advertisement mode of
the interface; the default value is the same
as the global configuration. If the
configuration differs with the global one,
the interface configuration will take effect.
(2) Configure LDP loop detection
1) Enable/disable LDP loop detection
2) Configure the maximum hop count of LDP loop detection
Command
Explanation
Router Configuration Mode
[no] loop-detection
Optional
Enable LDP loop detection, the no
operation will disable it.
[no] loop-detection-count <count>
optional
Configure the maximum hop count of LDP
loop detection, whose default value is 255,
the no operation will restore the default
value.
(3) Configure the LDP specified peers
Command
Explanation
Router Configuration Mode
[no] targeted-peer <ip-addr>
optional
Configure the remote peer of the LDP
targeted destination.
(4) Configure other LDP parameters
1) Configure the aging time or interval of each LDP timer
2) ID Configure LDP router ID
3) Configure the TCP interface address of LDP
4) Configure the LDP to discover peers via multicast Hellos or not,