User Manual

80-19
5) Configure the LDP to import BGP routes or not.
6) Configure the LDP to enable label merging capability or not.
7) Configure the LDP to transmit release messages or not.
8) Configure the LDP to retry or not when the label request is rejected
9) Hello Configure the LDP to receive Hello from the specified targets
Command
Explanation
Router Configuration Mode
[no] keepalive-interval <interval>
Optional
Configure the interval of sending LDP
keepalive messages, whose default value
is 10 seconds; the no operation will restore
the default value
[no] keepalive-timeout <time-val>
Optional
Configure the LDP keepalive timeout,
whose default value is 30 seconds; the no
operation will restore the default value
[no] Hello-interval <Hello-interval>
Optional
Configure the interval of sending multicast
HELLO messages, whose default value is
5 seconds; the no operation will restore the
default value
[no] hold-time <hold-time >
Optional
Configure the LDP multicast peer hold
time, whose default value is 15 seconds;
the no operation will restore the default
value
[no] targeted-peer-Hello-interval <Hello
-interval>
optional
Configure the interval of sending HELLO to
specified targets, whose default value is 15
seconds; the no operation will restore the
default value
[no] targeted-peer-hold-time <hold-time>
optional
Configure the LDP targeted peer hold time,
whose default value is 45 seconds; the no
operation will restore the default value
Interface Configuration Mode