User Manual

80-20
[no] ldp keepalive-interval <interval>
optional
Configure the interval of sending LDP
keepalive messages on a specified
interface; the no operation will restore the
default value
[no] ldp keepalive-timeout <time-val>
Optional
Configure the LDP keepalive timeout on a
specified interface; the no operation will
restore the default value
[no] ldp Hello-interval <Hello-interval>
Optional
Configure the interval of sending LDP
multicast HELLO messages on a specified
interface; the no operation will restore the
default value
[no] ldp hold-time <hold-time>
optional
Configure the LDP multicast peer hold time
on a specified interface; the no operation
will restore the default value
[no] ldp targeted-peer-Hello-interval
<Hello-interval>
optional
Configure the interval of sending LDP
HELLO messages to specified targets on a
specified interface; the no operation will
restore the default value
[no] ldp targeted-peer-hold-time
<hold-time>
optional
Configure the LDP targeted peer hold time
on a specified interface; the no operation
will restore the default value
router configuration mode
[no] router-id <ip-addr>
optional
Configure the LDP router ID, which is
obtained automatically by default. The no
operation will cancel the manually
configured router ID, and automatically
obtain a valid interface IP address as the
router ID.