User Manual

– 5 – – 6 –

Now, you can use the Web management interface to

continue the Switch management, please refer to the user

manual for more.

Note

For security reason, please change and

memorize the new password after this first

setup.

4. While IP Address be changed or

forgotten admin password –

To reset the IP address to the default IP Address

“192.168.0.100” and the user name / password to factory

default mode (default user name and password is admin).

Press the hardware reset button at the front panel about

5 seconds. After the device is rebooted, you can login the

management Web interface within the same subnet of

192.168.0.xx and default user name / password.

Hardware Reset button

5. Customer Support

Thank you for purchase PLANET products. You can browse

our online FAQ resource at the PLANET Web site rst to

check if it could solve you issue. If you need more support

information, please contact PLANET switch support team.

PLANET online FAQ :

http://www.planet.com.tw/en/support/faq.php?type=1

Switch support team mail address :

support_switch@planet.com.tw

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology

Corp. All other trademarks belong to their respective

owners.