User Manual

FGSW-2620VM / FGSW-2624SF User’s Manual
4.1.1.2 Advanced
Choose Advanced from System Information of Managed Switch, the screen in Figure 4-1-2 appears.
Figure 4-1-2 Switch Advanced setting screenshot
Object Description
Broadcast Storm Filter Mode
Configure broadcast storm control. Enable it and set the upper threshold for
individual ports. The threshold is the percentage of the port's total bandwidth
used by broadcast traffic. When broadcast traffic for a port rises above the
threshold you set, broadcast storm control becomes active. The valid
threshold values are 1/2, 1/4, 1/8, 1/16 and off. Default is “1/4”.
Collision Retry Forever Provide Collision Retry Forever function ”Disable” or ”Enable” on Switch; If
this function is disabled, when a packet meet a collision, the Switch will retry 6
times before discard the packets. Otherwise, the Switch will retry until the
packet is successfully sent.
Default mode is Enable.
MAC Table Auto-Aging
Fill in the number of seconds that an inactive MAC address remains in the
Switch's address table. The valid threshold values are 150, 300, 600 seconds
and off.
Default is “300” seconds.
Object Description
System Name
The name of Switch.
System Description
The description of Switch.
System Location
The Switch physical location.
Kernel Version
The kernel software version.
Firmware Version
The Switch's firmware version.
MAC Address
The unique hardware address assigned by manufacturer (default).
Apply button
Press the button to complete the configuration.
24