User Manual

3. MANAGE THE MEDIA CONVERTER
This product provides two different managed methods – configure through its DIP Switch or install into the central Web
Smart Media converter chassis for centralize management.
This section describes how to managed the FST-80x through its DIP Switch and Web Smart Media converter chassis.
Before use the FST-80x smart function, please read this chapter carefully.
3.1 DIP Switch configuration
The FST-80x provide DIP switch to setting fiber (HDX/FDX), UTP (Auto-negotiation / Manual), speed (10/100Mbps),
duplex mode (Half / Full duplex mode), LLR (Disable / Enable), LLCF (Disable / Enable). Please refer to the table below for
more detail decription.
DIP Switch Mode Description
On Fiber operates at Half Duplex mode. DIP Switch 1
Off
Fiber operates at Full Duplex mode (default).
On TX operates at Forced Mode. DIP Switch 2
Off
TX operates at Auto-Negotiation (default).
On TX operates at 10Mbps duplex mode. DIP Switch 3
Off
TX operates at 100Mbps duplex mode (default).
On TX operates at Half Duplex mode. DIP Switch 4
Off
TX operates at Full Duplex mode (default).
On LLR Enable. DIP Switch 5
Off
LLR Disable (default).
On LLCF Enable. DIP Switch 6
Off
LLCF Disable (default).
#
Notice:
 After change the DIP Switch setting, please power off and power on the FST-80x to take affect.
- 10 -