User Manual

1.4 Specification
Model FST-801 FST-802 FST-802S15 FST-802S35 FST-802S50 FST-806A20 FST-806B20
Hardware Specification
Standards IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX and 100Base-FX
Ports 1 10/100Base-TX port , 1 100Base-FX port
Fiber connector ST SC SC SC SC SC, WDM SC, WDM
Wavelength
Deployment
1310nm (Transmit and Receive) 1310 (TX)
1550 (RX)
1550 (TX)
1310 (RX)
Cable 10Base-T: 2-pair Cat. 3,4,5 UTP cable, up to 100 meters
100Base-TX: 2-pair Cat. 5 UTP cable, up to 100 meters
100Base-FX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 2km. 9/125μm single-mode cable,
provide long distance for 15/20/35/50km
Maximum Cable
distance
MM, 2km MM, 2km SM, 15km SM, 35km SM, 50km SM, 20km
Single wire
SM, 20km
Single wire
LED indicator System: PWR
TP: LNK/ACT, FDX/COL, 100
FX: LNK/ACT, FDX/COL
DIP switch Fiber (HDX/FDX), UTP (Auto-negotiation / Manual), speed (10/100Mbps), duplex mode (Half / Full
duplex mode), LLR (Disable / Enable), LLCF (Disable / Enable)
Speed Ethernet: 10/20Mbps for half / full-duplex
Fast Ethernet: 100/200Mbps for half / full-duplex
Power input DC 5V 2A
Power consumption 6.2 Watts / 21 BTU (maximum)
Operate environment 0~50 Degree C, 5%~90%RH
Storage environment -20~70 Degree C, 5%~90%RH
Dimension (W x D xH) 81 x 94 x 26mm
Weight 0.22kg
Emission FCC Class B, CE mark
- 5 -