User Manual

2.2 Slide Media Converter module into MC-1600MR/R48 Chassis installation
Step 1- Unscrew and pull out the FST-80x Media Converter board.
Step 2- Remove a blank faceplate from an empty expansion slot on the front of the chassis. The FST-80x Media
Converter board can be installed in any expansion slot.
Step 3- Slide the FST-80x Media Converter board into the expansion slot, aligning it with the guide rails, until it firmly
connects to the chassis’ backplane.
Step 4- Secure the FST-80x Media Converter board to the chassis by tightening the thumbscrew.
- 8 -