Datasheet

HPOE-460
3
Diagram
Specications
Model
HPOE-460
HardwareSpecications
Interface
“Data” Input Ports 4 x RJ-45
“Data+Power” Output Ports 4 x RJ-45
Data Rate 10/100/1000Mbps
LED
System: Power x 1 (Green)
Per PoE Port: PoE ready / in-use x 4 (Green)
Network Cable
10Base-T: 4-Pair UTP Cat. 5 up to 100m (328ft)
100Base-TX: 4-Pair UTP Cat. 5 up to 100m (328ft)
1000Base-T: 4-Pair UTP Cat. 5e, 6, up to 100m (328ft)
EIA/TIA- 568 100-ohm STP (100m, 328ft)
Dimensions (W x D x H) 26 x 70 x 97 mm
Weight 220g
Power Requirement DC 52V~56V
Power over Ethernets
PoE Power Supply Type Mid-Span
PoE Power Output Per Port DC 52V 30.8 Watts / 15.4 Watts
Power Pin Assignment 4/5(+), 7/8(-)
PoE Power Budget 120 Watts
Number of 802.3af PD Class 0, 1, 2, 3 can be powered 4
Number of 802.3at PD Class 1, 2, 3 can be powered 4
Number of 802.3at PD Class 0, 4 can be powered 4
Standards Conformance
Standards Compliance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3at Enhancement Power over Ethernet
IEEE 802.3af Power over Ethernet
Regulation Compliance FCC Part 15 Class B, CE
Environment
Operating Temperature 0 ~ 50 degrees C
Storage Temperature -10 ~ 70 degrees C
Humidity 5 ~ 95% (non-condensing)
1234
4-Port High Power PoE Injector Hub
IEEE 802.3at
52V~56V DC
PWR123
PoE in-Use
4
1 2 3 4
DATA & PWR
Remove “DATA & PWR”
Connection before power on.
CAUTION
DATA
94.00mm
70.30mm26.20mm