CMOS Box Internet Camera ICA-120 Quick Installation Guide
Table of Contents Chapter 1. Introduction..................................................................................... 3 1.1 Before Installation.................................................................................. 3 1.2 System Requirements for Viewer............................................................. 3 Chapter 2. ICA-120........................................................................................... 4 2.1 Package Content..............................................
Chapter 1. Introduction Thank you for purchasing the internet camera. It is versatile and high image solution of the perfect surveillance application. The internet camera state-of-art design is considerable to fit in various network environments. 1.1 Before Installation Before installation, please be sure to read this quick installation guide and user’s manual (CD) carefully to complete machine installation. 1.
Chapter 2. ICA-120 2.1 Package Content ICA-120 x 1 Power Adapter x 1 Camera Mount Kit x 1 CD Disk x 1 Quick Installation Guide x 1 Note 1. If any of the above items are missing, please contact your dealer immediately. 2. Using a power supply with a different voltage that the one included with the ICA-120 will cause damage and void the warranty for ICA-120. 2.2 Physical Description 2.2.1 Front View Internal Microphone Lens Lens User could adjust the focus to get the best picture quality.
2.2.2 Rear View Audio Output Jack DC Power Jack Factory Default Reset LAN Socket DI/DO Connector External MIC Jack Power & LAN LED Audio Output Jack Audio-out Jack allows this device to output audio for two-way communication or alerting sound. DC Power Jack The input power is 12VDC. Note Only use the power adapter supplied with ICA-120. Otherwise, the product may be damaged. LAN Socket The LAN socket is a RJ-45 connector for connections to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling.
Power & LAN LED (green color) This LED is used to indicate whether DC power is on or not. In addition, this LED will be flashing while network accessing via Ethernet. DI/DO Connector The Camera provides a terminal block with 4 pins of connectors for DI and DO. Please refer to the Appendix B in this manual for more information. External Microphone The Camera also supports external microphone. User can plug in an external microphone to pick up voice more. 2.2.3 Installation Steps 1.
Chapter 3. IP Wizard Installation and Operation This chapter shows how to quick set up your internet camera. The internet camera is with the default settings. However to help you find the networked camera quickly the windows utility-IP Wizard can search the cameras in the network that shall help you to configure some basic setting before you started advanced management and monitoring. 3.1 IP Wizard Installation 1. Insert the bundled CD into the CD-ROM drive to launch the autorun program.
3. The “Welcome to the InstallShield Wizard for IPWizard” will display on the screen and click “Next” to continue. 4. Please click “Next” to install with original settings, or you may click “Change…” button to modify the install folder then press “Next” to continue.
5. Please click “Install” to start the installation. 6. Please click “Finish” to complete the installation 7. Please double-click the utility icon utility.
8. Press “Search” button. IP Wizard will list all IP Cameras in your LAN environment: Note Please connect you camera or video server to PC directly, and use IP Wizard to search IP address of device, when you use device at first time or forget IP address. 3.2 Wizard function Please select your device and press “Wizard”. The utility featured of “Wizard” function to help user to initial device. User can setup IP address, username and password step by step.
Please enter User Name and Password. Default Username is: admin, leave password blank. Then click “Submit”. 3.3 Username and Password You may change the ID and assign a new password to your device or keep the original and press “Next” to continue. Note If you assign new password to your device, please write down and avoid forgetting it.
You can select “Static IP” and enter the IP settings. Or select “DHCP ON” when there is a DHCP server in your network. Note If no IP address is assigned after 30 seconds, Internet Camera will use its default address 192.168.0.20. User may open the web browser, and key in the IP address (for example: http://192.168.0.20, the default IP address) in the address field to login web configuration page and refer to the User’s manual in the bundled CD disk for more configuration.
Chapter 4. Cam Viewer Installation Note The Cam Viewer Pro 30 days trial version installation steps are similar. Below is the installation of Cam Viewer Lite. 1. Insert the bundled Cam Viewer CD disk into the CD-ROM drive to launch the autorun program. Once completed, a welcome menu screen will appear. Click the “Cam Viewer Lite” hyperlink, the below InstallShield Wizard dialog box will appear. Note If the welcome screen does not appear, click “Start” at the taskbar.
3. The “Welcome to the InstallShield Wizard for Planet Cam Viewer Lite 1.0.3” will display on the screen, please click “Next”. 4.
5. Please key in user name and company name for which you want and click “Next” to continue installation. 6. Check the option “Complete” – all program features will be installed (Requires the most disk space) and click “Next” to continue installation.
7. “Ready to Install the Program” will appear to prompt you to start the installation. Please click “Install” to start. 8. Please click “No” to finish the Cam Viewer Lite installation. 9. Note: In above step, when Cam Viewer works with MBM5 (Motherboard Monitor 5), Cam Viewer will display CPU temperature and fan speed. Please click “Yes” if you need this function and refer to the manual of Cam Viewer CD disk for complete installation.
Appendix A: Feature Listing for Cam Viewer Software Version Cam Viewer Lite Cam Viewer Pro 32 4 / 8 / 16 / 32 / 64 - V Smart Guard - V I/O Device V V Hotline - V Address Book - V Unusual event System log Unusual event System log Counting application - 2 way counting IP Camera Input Dual Monitor Log Viewer Counting Application Remote Playback Server Concurrent Playback Counting Function Smart Search Remote Live Viewer - Unlimited 1 Channel 16 Channels - V General Motion Gene
Appendix B: Suggest Hardware / System Requirement Total FPS ~600 600~480 480~240 240~120 120~ CPU Intel Core 2 Duo QX6800 Intel Core 2 Duo E6600 Intel Pentium D 930 Intel P4 3.0 GHz Intel P4 2.8 GHz RAM 4 GB 2 GB 2 GB 1 GB 1 GB Chipset of Motherboard VGA Card Ethernet Hard Disk O.S.
Ordering Information for Cam Viewer Pro Model Description CVP-4 4-Channel Cam Viewer Professional CVP-8 8-Channel Cam Viewer Professional CVP-16 16-Channel Cam Viewer Professional CVP-32 32-Channel Cam Viewer Professional CVP-64 64-Channel Cam Viewer Professional Further Configuration If you want to configure more detail settings of ICA-120, please refer to the user manual in the CD disk.
This page is intentionally left blank