User Manual

5
Or you may execute IPEditV3 to discover IP camera’s IP address. Before starting
installation, please refer to below:
Procedures of IPEdit utility
• Please find the IPEditV3.exe in the Utility folder on user’s manual CD
• Double-click the IPEditV3.exe and the following screen should be prompt on
your computer.
IPEdit overview
• Choose the destination camera for IP address and device name modifications
or using default setting for viewing.
• After modifications, you may now connect the camera via web browser.
Further Configuration
If you want to configure the detail settings, please refer to user’s manual in the CD. If you
have any difficulties on resolving the problem while installing or using the camera, please
feel free to contact PLANET for support.