Datasheet

ManualsBrandsPlanet ManualsAutomationEthernet Switch, RJ45 Ports 4, Fibre Ports 2SFP, 1Gbps, Layer 2 Unmanaged

IGS-620TF

Industrial 4-Port 10/100/1000T + 2-Port

100/1000X SFP Ethernet Switch

Flexible, Reliable and Industrial-grade Network Distance Extension Solution

PLANET IGS-620TF is an Industrial 6-port full Gigabit Ethernet Switch providing non-

blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in

harsh industrial environment. It provides 4-port 10/100/1000Base-T RJ-45 copper and

2 extra 100/1000Base-X SFP fiber optic interfaces delivered in an IP30 rugged strong

case with redundant power system. The IGS-620TF is well suited for applications in

deploying surveillance system, and securing control and wireless service in climatically

demanding environments with wide temperature range from -40 to 75 degrees C.

Fiber-Optical Link Capability Enables Extension of Network Deployment

The two SFP slots are compatible with 100Base-FX or 1000Base-SX / LX / WDM

through SFP (Small Form Factor Pluggable) fiber-optic transceivers. The fiber optical

uplink capability guarantees the throughput to all nodes hooked into the network and the

Gigabit Ethernet distance can be extended from 550 meters (Multi-Mode ber cable) up

to 10/20/30/40/50/70/120 kilometers (Single-Mode fiber cable), also the Fast Ethernet

distance can be extended from 2km (Multi-Mode fiber cable) up to 20/40/60 kilometers

(Single-Mode fiber cable). They are well suited for applications within the factory data

centers and distributions.

Physical Port

• 4-port 10/100/1000Base-T RJ-45 with auto MDI /

MDI-X function

• 2-port SFP slot interface, SFP supports 1000Base-X

and 100Base-FX transceiver via DIP switch congured

Fiber Port Redundancy

• Link status auto-detect and redundant on Dual ports

with the same connector type

• Only Primary-Port is active at a time, the Backup-Port

is blocked

• When Primary-Port link failure occurs, the trafc will

swap to Backup-Port automatically.

• Once the Primary-Port status is back to link-up, the

trafc will swap from Backup-Port to Primary-Port.

Layer 2 Features

• Supports Auto-negotiation and 10/100Mbps half / full

duplex and 1000Mbps full duplex mode

• High performance Store and Forward architecture,

runt/CRC ltering eliminates erroneous packets to

optimize the network bandwidth

• Prevents packet loss with back pressure (Half-Duplex)

and IEEE 802.3x PAUSE frame ow control (Full-

Duplex)

• 9K Jumbo Frame Size support

• Backplane (Switching Fabric): 12Gbps

• Integrated address look-up engine, support 1K

absolute MAC addresses

• Automatic address learning and address aging

• CSMA/CD Protocol

Fiber Switch Mode

—

Distance Extension

1000Base-X Fiber

Gigabit

Ethernet Switch

MGB-L120

Switch Mode

IGS-620TF

1000Base-SX/LX Fiber-optic

1000

Gigabit

Ethernet Switch

240km

1000

Summary of content (7 pages)

PAGE 1
IGS-620TF Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP Ethernet Switch Physical Port • 4-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function • 2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured Fiber Port Redundancy Flexible, Reliable and Industrial-grade Network Distance Extension Solution PLANET IGS-620TF is an Industrial 6-port full Gigabit Ethernet Switch providing nonblocking wire-speed performance and great flexibility for Gigabi
PAGE 2
IGS-620TF Adjustable 6-Port Switch Mode or 4 + 2 Fiber Redundant Mode The two SFP slots allow to change the operation mode with its built-in DIP switch. Via the built-in DIP switch, the IGS-620TF can be configured as 6-port Ethernet switch or Industrial Case / Installation 4+2 fiber redundant mode.
PAGE 3
IGS-620TF Application Hardened Environment Application The IGS-620TF Industrial Gigabit Ethernet Switch offers full port Gigabit speed. It provides very high reliability and security features to make sure the continuous operation in harsh environments such as control cabinet of transportation, factory, outdoors and places where extreme low or high temperatures can be experienced.
PAGE 4
IGS-620TF Specifications IGS-620TF Model Hardware Specifications Copper Ports 4 x 10/100/1000Base-T RJ-45 TP Auto-MDI/MDI-X, Auto-Negotiation SFP / mini-GBIC Slots 2 1000Base-SX/LX/BX SFP interfaces (Port-5 and Port-6) Compatible with 100Base-FX SFP DIP Switch DIP-1: SFP Port 5 1000Base-X (default) / 100Base-FX DIP-2: SFP Port 6 1000Base-X (default)/ 100Base-FX DIP-3: Switch mode / Fiber Redundant mode Connector Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; P
PAGE 5
IGS-620TF Regulation Compliance FCC Part 15 Class A, CE Stability Testing IEC60068-2-32(Free fall) IEC60068-2-27(Shock) IEC60068-2-6(Vibration) Environment Temperature Operating: -40~75 degrees C Storage: -40~75 degrees C Humidity Operating: 5~95% (Non-condensing) Storage: 5~95% (Non-condensing) Dimensions Side View V1+ Fault V2PWR2 V2+ 2 Port 6 1 ON Port 5 Input DC 12~48V, AC 24V 1 2 3 4 5 6 V1PWR1 3 Mode ON OFF 100FX Port 5 1000X Port 6 100FX 1000X Fiber Mode Redundant Swi
PAGE 6
IGS-620TF Ordering Information IGS-620TF Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP Ethernet Switch Related SFP Transceivers Fast Ethernet Transceiver (100Base-X SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp.
PAGE 7
IGS-620TF Gigabit Ethernet Transceiver (1000Base-BX, Single Fiber Bi-Directional SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance MGB-LA10 1000 WDM(LC) Single Mode 10km 1310nm 1550nm 0 ~ 60 O C MGB-LB10 1000 WDM(LC) Single Mode 10km 1550nm 1310nm 0 ~ 60 O C MGB-LA20 1000 WDM(LC) Single Mode 20km 1310nm 1550nm 0 ~ 60 O C MGB-LB20 1000 WDM(LC) Single Mode 20km 1550nm 1310nm 0 ~ 60 O C MGB-LA40 1000 WDM(LC) Single Mode 40km 1310nm 1550nm 0 ~ 60 O C MG