Datasheet

IGS-801T
New slim type with more practicability and convenience
After entering the Industrial Ethernet market with popular ISW / IFT series
Fast Ethernet Switch / Converter products, PLANET now releases the
advanced industrial hardened Gigabit Ethernet Switch series with new slim
type, IP-30 metal case. The compact, IP-30 standard metal case allows
either DIN rail or wall mounting for efficient use of cabinet space. The
IGS-801T, one of the new series model, equips with 8 10/100/1000Mbps
auto negotiation ports and operates reliably in Heavy Industrial demanding
environments.
Stable performance under difficult environments
The IGS-801T provides a high level of immunity against electromagnetic
interference and heavy electrical surges which are usually found on plant
floors or in curb side traffic control cabinets. Being able to operate under
the temperature range from -40 to 75 Degree C coupled with hazardous
location certification (Class 1 Division 2), the IGS-801T can be placed
in almost any difficult environment. The IGS-801T also possesses an
integrated power supply source with wide range of voltages (12 to 48V
DC) for worldwide high availability applications requiring dual or backup
power inputs.
Robust Switch performance
The IGS-801T offers high performance switch architecture. With the 8
10/100/1000Mbps Gigabit Ethernet ports providing non-blocking switch
fabric and wire-speed throughput as high as 16Gbps and the 8K MAC
Address table, the IGS-801T can perform wire-speed packets transfer
without risk of packet loss.
The flow control function enables the IGS-801T to provide fast and reliable
data transfer. The Gigabit port with 9K Jumbo frame supported can
handle extremely large amounts of data transmission in industrial topology
that forward data to central control room.
Data Sheet
1
Key Features
PHYSICAL PORT
8-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function•
LAYER 2 FEATURES
Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, •
IEEE 802.3ab 1000Base-T Ethernet standard
Supports Auto-negotiation and 10/100Mbps half / full duplex •
and 1000Mbps full duplex mode
High performance Store and Forward architecture, broadcast •
storm control, runt/CRC filtering eliminates erroneous packets
to optimize the network bandwidth
Prevents packet loss with back pressure (Half-Duplex) and IEEE •
802.3x PAUSE frame flow control (Full-Duplex)
Backplane (Switching Fabric): 16Gbps•
Integrated address look-up engine, support 8K absolute MAC •
addresses
176 kilobytes on-chip frame buffer•
9K Jumbo packet size support•
Automatic address learning and address aging•
CSMA/CD Protocol•
INDUSTRIAL CASE / INSTALLATION
IP-30 Metal case / Protection•
DIN Rail and Wall Mount Design•
12 to 48V DC, redundant power with polarity reverse protect •
function and connective removable terminal block for master
and slave power
Supports EFT protection 6000 VDC for power line •
Supports 6000 VDC Ethernet ESD protection •
-40 to 75 Degree C operation temperature •
8-Port 10/100/1000Mbps Industrial Gigabit Ethernet Switch
with Wide Operating Temperature (-40~75 Degree C)
All of the RJ-45 copper interfaces in the IGS-801T support 10/100/1000Mbps
Auto-Negotiation for optimal speed detection through RJ-45 Category 6, 5
or 5e cables. The standard Auto-MDI/MDI-X support can detect the type
of connection to any Ethernet device without requiring special straight or
crossover cables.