User Manual

HDMI / Video Wall over IP with PoE
IHD-200PT / IHD-200PR
41
Chapter 6: Display Quality Adjustment
6.1 Graphic Mode & Video Mode
User can press Button “B2” for once(less than 1 sec.) and then convert these two
modes. (default is Graphic Mode)
Graphic Mode: It’s usually for the static state video. Pictures are the main display
contents, and the pixel update processing is not so fast. The CPU
consumption is lower than video mode.
Video Mode: It’s usually for the dynamic state video. Videos are the main display
contents, and the pixel update processing is fast. The CPU
consumption is higher than graphic mode.
6.2 Anti–Dither
User can press Button “B2” for 3 seconds (till the subtitle appears) and then convert
three levels of Anti–Dither. (default is Anti-Dither off)
There are 3 levels of Anti–Dither:
It would probably cause “Motion Blur” or “Broken Map” when user plays the high
quality video, but after “Anti–Dither” adjustment, it can be improved.
Anti–Dither 2: It’s the worst performance.
Anti–Dither 1: It’s better than Anti–Dither 2.