User Manual

- 10 - - 12 - - 13 - - 14 -
- 9 - - 11 -
Step 10: Repeat Steps 3 and 4
Note
1. Use only the waterproof cable gland provided in the
package of the IGTP-825AT.
2. If the above installation procedure is not properly
followed, the warranty will be invalidated.
11.31mm
40.78mm
5.00mm
30.22mm
29.80mm
20.18
13.72
14.00
30.10
3. If the waterproof cable gland is found missing or
damage, please contact your local reseller where you
purchased from.
4. Never use any waterproof cable gland that is not
purchased from PLANET or doesn’t have the same
dimensions of the IGTP-825AT; it will damage the
device permanently.
Note
EMD (Lightning) DAMAGE IS NOT CONVERED UNDER
WARRANTY.
3.5 Connecting IGTP-825AT to PD
Step 1: Connect the additional Cat5e/6 cable from the PoE+ Out of
the IGTP-825AT to a remote PD.
PoE IP Camera
Power Supply
DC24-56V
Power
DC
DC
Power Line (DC)
1000BASE-SX/LX Fiber Optic
PoE
1000BASE-T UTP with PoE
IGTP-825AT
PoE
Power
Data
Data
100m
802.3at PoE
+
Ethernet Switch
1000
1000
Step 2: The PoE+ Out port is the power injector which transmits DC
voltage to the Cat5e/6 cable and transfer data from the Data
source.
Step 3: Once the IGTP-825AT detects the existence of an IEEE
802.3at/af device, the LINK/ACT LED indicator will be lit
steadily, showing it is providing power.
Note
According to IEEE 802.3at/af standard, the IGTP-825AT
will not inject power to the cable if not connected to a
standard IEEE 802.3at/af device.
ESD Protection
Air 8KV DC
Contact 6KV DC
Surge Protection 6KV
Enclosure IP67-rated and IK10 aluminum metal case
Installation Wall-mount ear
Dimensions (W x D x H)
150 x 43.8 x 72.94 mm
169.85 x 43.8 x 72.94 mm, with cable gland
Weight 389g
MTBF >100000 hours
Power over Ethernet
PoE Standard
IEEE 802.3at Power over Ethernet Plus / End-
span PSE
Backward compatible with IEEE 802.3af Power
over Ethernet
PoE Power Output 55V DC, max. 30 watts
PoE Power Supply Type End-span
Power Pin Assignment 1/2 (+), 3/6 (-)
PoE Power Budget 30 watts (max.) @ IEEE 802.3at PoE+ input
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Protocols and Standards
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber Optic
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Stability Testing
IEC 60068-2-32 (Free fall)
IEC 60068-2-27 (Shock)
IEC 60068-2-6 (Vibration)
Environment
Temperature
Operating: -40~75 degrees C
Storage: -40~85 degrees C
Humidity
Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)
Note
The PoE power output ability will depend on the distance.
5. Customer Support
Thank you for purchasing PLANET products. You can browse our online
FAQ resource and user’s manual on PLANET web site rst to check if it
could solve your issue. If you need more support information, please
contact PLANET support team.
PLANET online FAQs:
https://www.planet.com.tw/en/support/faq?method=category&c1=2
Support team mail address:
[e-mail]
Copyright © PLANET Technology Corp. 2020.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
3.3 Wall-mount Installation
To install the Outdoor PoE+ Media Converter on the wall, please follow
the instructions described below.
Step 1: Find the wall that you want to mount the Outdoor PoE+ Media
Converter on.
Step 2: Refer to the picture below to screw the four screws on the wall.
140.36mm
59mm
PoE-
in-Use
PoE+Data
IPOE-165
PWR
DC Input Range:
24-56V , 1.6A max.
V+
Step 3: Use a screwdriver to screw them into the wall.
3.4 Grounding the Device
Users MUST complete grounding wired with the device; otherwise, a
sudden lightning could cause fatal damage to the device.
Earth Ground
4.ProductSpecications
Product IGTP-825AT
HardwareSpecications
Interface
Input Port
(SFP Slot)
1 x 1000BASE-SX/LX/BX “Data” in SFP port
Output Port
1 x 10/100/1000BASE-T Ethernet with IEEE
802.3at PoE+ “Data + DC” out RJ45 port
- Auto MDI/MDI-X, auto-negotiation RJ45
connector
Input Power
Terminal Block
1 x 2-pin terminal block
- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
Cable
10BASE-T:UTPcategory3,5cable(≤100m)
100BASE-TX: UTP category 5,5e cable
(≤100m)
1000BASE-T:UTPcategory5e,6cable(≤100m)
1000BASE-SX/LX:
- Multi-mode:50/125μmor62.5/125μm
opticalber
- Single-mode:9/125μmopticalber
LED
PWR (Green)
TP 10/100/1000BASE-T: LNK/ACT (Green)
Fiber 1000BASE-X: LNK (Green)
Input Voltage 24~56V DC
Power Consumption
Voltage System on Full Load (Max.)
DC 24V 0.72W 43.4W
DC 36V 0.72W 41.04W
DC 54V 1.08W 40.5W