Datasheet

ISW-504PT
The PLANET ISW-504PT PoE Industrial Ethernet Switch is designed to
transmit power and data over single Ethernet cable to remote PoE capable
devices and operates reliably in heavy industrial demanding environments.
The ISW-504PT provides 5 10/100Mbps copper ports with 4-Port IEEE
802.3af Power over Ethernet inject interfaces delivered in an IP-30
rugged strong case. Supporting up to 15.4Watts power per port for any
remote IEEE 802.3af powered device (PD) such as PoE IP cameras and PoE
wireless LAN access point, the ISW-504PT is an ideal solution to deploy
surveillance system and wireless service in climatically demanding wide
temperature range (-40 to 75 Degree C) environments.
IEEE 802.3af Power over Ethernet PSE Industrial Switch
PoE feature is more often supported in the industrial Ethernet devices
for efficient operation in harsh environments. The ISW-504PT in-line
power follows standard IEEE 802.3af and allows giving power to 4 PoE
compliant devices at the distance up to 100 meters through the 4-pair
Cat 5 / 5e UTP wire. With Data and Power over Ethernet from one unit,
the ISW-504PT shall reduce cables deployment and eliminates the need
for dedicated electrical outlets on the wall, ceiling or any unreachable
place. A wire carries both data and power lowering the installation costs,
simplifying the installation effort and eliminating the need for electricians
or extension cords.Furthermore, there is only 24V DC input in some
industrial environments, the ISW-504PT series supports 24V DC or 48V DC
dual voltages input and able to provide more wide range of industrial IEEE
802.3af PoE applications.
Wide Temperature conquers installation in harsh environments
The ISW-504PT provides a high level of immunity against electromagnetic
interference and heavy electrical surges which are usually found on plant
floors or in curb side traffic control cabinets. Being able to operate under
wide temperature range from -40 to 75 Degree C, the ISW-504PT can be
placed in almost any difficult environment. It also offers dual-redundant,
reversible polarity 24V DC or 48V DC power inputs for high availability
applications requiring backup power inputs.
Robust Switch performance
The ISW-504PT offers high performance switch architecture with 5
10/100Mbps UTP ports. It provides non-blocking switch fabric, wire-speed
throughput as high as 1Gbps and the 2K MAC Address table. It also
performs wire-speed packets transfer without risk of packet loss and the
Flow Control function is default enabled to provide fast and reliable data
transfer.
All of the RJ-45 copper interfaces support 10/100Mbps Auto-Negotiation
for optimal speed detection through RJ-45 Category 3, 4, 5, 5e or 6 cable.
The standard Auto-MDI/MDI-X support can detect the type of connection
to any Ethernet device without requiring special straight or crossover
cables.
Data Sheet
1
5-Port 10/100Mbps with 4-Port PoE Industrial
Ethernet Switch - Wide Temperature
PoE
100Base-TX UTP with PoE
PoE IP Camera
UTP
Output
24V DC Input
802.3af PoE
PoE