User Manual

- Step 3: Configure Least Cost Route
You can find LCR Outgoing Dial Rule in Advance Setting – Dialing Plan
LCR Outgoing Dial Rule
Outgoing Number
It’s is the leading digits of the call out dialing number
Length Min
Min allowed length you can dial.
Length Maxi
MAX allowed length you can dial.
Delete Length
the number of digits that will be stripped from beginning of the
dialed number.
Add Digits
is the digits that will be added to the beginning of the dialed number.
LCR Idxs
It’s shown in Set Register SIP Server Plan, it is used for indicating
the rule should be applied to which ITSP.
As we know that make international calls, we should dial International Prefix Code + Country Code +
Telephone Number.
In our case, calling to U.S.A(+1), we should apply the setting with ITSP_A.
The number is like 00 + 1 + x (wildcard)
The setting above means when dialing 001x….the call will use the Route LCR IDX 1
Calling to China(+86), we should apply the setting with ITSP_B.
The number is like 00 + 86 + x (wildcard)
The setting above means when dialing 0086x….the call will go though the Route LCR IDX 2
51