User Manual

12
3. How to Set Up MZK-W04NU
(Note:, Please turn out the stand before using.)
1. Unwrap the package of MZK-W04NU Wireless Router and check if the components are
complete and without missing anything.
2. Choose an Installation Site.
Select a suitable place on the network to install MZK-W04NU Wireless Router. And make
sure that the Wireless Router and the DSL/Cable modem are not powered on yet.
3. Connect LAN Cables.
Use standard LAN cables to connect PCs to the switching hub ports on MZK-W04NU. Both
10 Base-T and 100 Base-T connections can be used simultaneously.
4. Connect WAN Cable.
Connect the DSL or Cable modem to the WAN port on MZK-W04NU.
5. Power On.
Power the DSL or Cable modem on, and connect the adapter with MZK-W04NU and plug the
other side of the power cord into the power socket to power on it. While detecting, the
Power LED and Status LED will be on, and LAN LEDs will be blinking for a while and then
the MZK-W04NU will be ready in a short time and the Status LED will be green.