User Manual

If your MZK-W04NU Wireless Router does not response, and you cannot enter the

web configuration page, please follow the steps below to check if there is any

problem:

1. Make sure that MZK-W04NU Wireless Router is properly installed and powered on,

and LAN connection is O.K. You can test the connection by using “Ping”

command:

 Open MS-DOS window or click “Start→

→→

→Run…” on the desktop to show the

command prompt window.

 Enter the command: ping 192.168.1.1

 If it shows the message of “Request time out,” the problem can be either

disorder of connection, or the conflict between your PC’s IP address and the

router’s IP address.

2. If your PC uses static IP address, the IP address must between in the range of

192.168.1.2~192.168.1.254, in order not to occupy the MZK-W04NU’s default IP

address “192.168.1.1.” In addition, the subnet mask must be “255.255.255.0.”

To know more details of your PC and Internet connection, please check the TCP/IP

settings on your PC.

3. You have to make sure that your PC and MZK-W04NU

are on the same segment.