User Manual

21
3.2. Broadband Type & IP Address Info
3.2.1. Static IP Address
 Step 1
If you have already had a Static IP address, you can choose this entry and use the wizard to
configure. Click “Static IP Address” to proceed.
 Step 2
The following are the WAN settings; please configure the settings according to the real
environment.
 IP address：Enter the IP address provided by your ISP.
 Subnet Mask：Enter the Subnet Mask address provided by your ISP.
 Default Gateway：Enter the Default Gateway address provided by your ISP.
 DNS address：Enter the DNS IP address provided by your ISP.
 Finish：After finishing setting up, you may click here.
3.2.2. DHCP
 Step1
If you use cable modem, you may choose this entry and use the wizard to configure. Click
“DHCP” to proceed.