User Manual

22
 Step2
The following are the WAN settings; please configure the settings according to the real
environment.
 Change MAC address：The default MAC address of MZK-W04NU is the Network Interface
Card’s (NIC) MAC address on the WAN side. If you were asked to use the NIC provided by the
ISP, you may click “Enable” and enter the MAC address of NIC provided by the ISP. We do
not suggest you to change the default MAC address, if your ISP does not ask you to change
it.
 Finish：After finishing setting up, you may click here.
3.2.3. PPPoE
 Step1
If you use PPPoE, you may choose this entry and use the wizard to configure. Click “PPPoE ” to
proceed.
 Step2
The following are the WAN settings; please configure the settings according to the real
environment.