User Manual

26
5. Management
You can configure many things through Management functions, such as
 Remote Management
 Password
 Time Zone and NTP (Network Time Protocol)
 Firmware Update
 Save & Load Settings
 Load Default & Reboot
5.1. Remote Management
MZK-W04NU Wireless Router can be managed by any PC from your LAN. If the router has
connected to the Internet, the administrator can also configure it via the Internet. Owing to the
security, however, you should have a static IP before performing remote management.
 Remote Management：Click the check box to enable remote management function.
 Management host IP：Enter the IP address of the remote management interface.
 Reply ping：Ping is a common and useful tool to know the connection status of a specified
remote network device, but some malicious intruder will try to fill your network bandwidth
with a lot of PING request data packet, to make your internet connection become very
slow, even unusable. Check this box and the router will reply all inbound PING request,
and when you activate this function, not only you but all the users will be able to ping your
router from Internet.
 Apply：Click this button to save the settings.
 Clear：If there is anything wrong with the settings you made, you can click “Clear” to
configure the page again.