User Manual

28
5.3. Date & Time
You can set the system date and time according to the time zone where you locate now.
 NTP：Click to enable the Network Time Protocol function.
 Timezone：Scroll the list to choose the time zone for MZK-W04NU.
 NTP Server 1/2：You can enter the Internet address of an NTP(Network Time Protocol)
Server for your system to synchronize with.
 Time：Here shows the current date and time.
 Apply：Click this button, the system will save the settings and synchronize with NTP
Server.
 Clear：If there is anything wrong with the configuration, you can click “Clear” to configure
the page again.
 Refresh：Click this button to update to the latest date and time.