User Manual

1. Advanced

1.1. DHCP Server

Dynamic DNS can let you connect with one or more DDNS services to update your current dynamic

IP address.

DHCP stands for Dynamic Host Control Protocol. MZK-W04NU Wireless Router has

a built-in DHCP server which can automatically assign an IP address to those computers/devices on

the LAN/private network. If you enable DHCP server, the client host will obtain an IP address

automatically. Whenever you turn on the computer, it will automatically load the proper TCP/IP

settings from MZK-W04NU. The DHCP server will allocate an unused IP address from the IP address

pool to the requesting computer, but you must specify the beginning and ending address of the IP

address pool.

DHCP Server Setting

 DHCP Server：Click to enable the built-in DHCP server, it will automatically distribute IP

addresses to the devices which send request to it.

 Start Address/End Address：Please enter the first and the last IP addresses which

MZK-W04NU distribute IP addresses to. The IP addresses in this range can get assigned IP

addresses from MZK-W04NU. (However, all the PCs on the same LAN should use the same

subnet mask.)

 1

/ 2

WINS Server：If you already set and need the WINS server, you can fill in the IP

address of the WINS server in the columns.

 Apply：After finishing setting up DHCP server, click this button to save the settings.

 Clear：If you want to clear the settings you just made, click this button.