User Manual

49
1.4. Static Routing
This section describes how to manually add routing information.
 Destination IP/Netmask：Enter the IP address of packet destination and Netmask of
packet destination.
 Gateway：Enter the address of the first gateway through which the target network is
reached.
 Metric：Enter the hop count number (the number of gateways used between the product
and target network).
 Interface：Select the interface for which static routing is configured.
 Enable：Put a check in the check box to enable each route.
 Apply：Click this button to save the settings.
 Clear：If there is anything wrong with the settings you made, you can click “Clear” to
configure the page again.