User Manual

52
2.2. DMZ
If your computer cannot use Internet applications or cannot provide services to remote users when
applying MZK-W04NU at the same time, you can let the host which wants to access to the Internet
using DMZ function. Enter the host’s LAN IP address to enable this function, but be aware that one
MZK-W04NU can only correspond to a single DMZ host.
 Enable DMZ：Check this box to enable DMZ function, uncheck this box to disable DMZ
function .
 Client PC IP address：Please enter the private IP address that the Internet IP address
will be mapped to.
 Apply：Click this button to save the settings.
 Clear：If there is anything wrong with the settings you made, you can click “Clear” to
configure the page again.
Adding a client host to DMZ might expose it to a variety of danger such as virus or
worm attacks because of unrestricted Internet access; therefore, only use this option
as the last means. Besides, before using DMZ function, you should update the
up-to-date settings of security system and virus signatures on the host.