User Manual

54
3. Wireless LAN
If your computer, PDA, game console, or other network devices which is equipped with wireless
network interface, you can you can use the wireless function of this router to let them connect to
Internet and share resources with other computers with wired-LAN connection. You can also use
the built-in security functions to protect your network from being intruded by malicious intruders.
3.1. Basic Settings
This page includes all the fundamental and basic parameters. After changing any parameters, you
have to apply and restart the device and then the new settings can be effective.
 Wireless LAN：Click the check box to enable the Wireless function. The default value is
“Enabled”. After modifying the settings, please click “Apply” to save the settings and
restart the system.
 SSID：
：：
：Every SSID is unique in the WLAN (SSID can be 16-digitASCII characters and
case-sensitive). SSID can prevent two nearby WLAN from combining to be one. You can
give BLW-54MF an SSID, and only whose SSID is the same with it can connect with it. The
default SSID is “planexuser”. Notice: When entering your SSID, please don't use
special characters such as "@", "#", "$", "%", "^", "&", "*", "(", and ")". Using
special characters or symbols could cause wireless connection difficulties.
 Wireless Mode：Scroll down the list to choose a band width. There are six kinds of modes:
B/G/N, G/N, B/G, B, G, and N.
 Channel：Here shows the channels provided by the local wireless connection. The setting
of the channels of the wireless network should be the same as the wireless APs.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
 Frequency Bandwidth：Choose a kind of frequency bandwidth: 20MHz or 20/40MHz.
 Hide SSID：If you check the check box of “Hide SSID,” SSID of MZK-W04NU will not
appear on the other PC’s wireless network list. Therefore, the Wireless Router/AP can
block the users without authentication.