User Manual

USB to LAN (Gigabit) Adapter

INTRODUCTION

The USB Ethernet Adapter provides users to launch Internet with easy installation and lower

power consumption via the USB interface. The adapter is compliant to USB2.0, which contribute

to the high compatibility and hence strengthen the brilliant transfer performance.

The device is compatible to USB 2.0 and 1.1. Along with complying 802.3, 802.3u and 802.3ab

standard, users are allowed to add the networking compatibility to the computer in any

environment that encountered. Users would not have to endure the effort opening PC cases

anymore.

FEATURES

z Compliant USB1.1 and 2.0 specification

z IEEE 802.3, 802.3u, 802.3ab (10BASE-T/100BASE-TX/1000BASE-T) compatible

z Supports both Full-duplex with flow control and Half-duplex with backpressure operation

z Supports 512 bytes for EEPROM

z Supports Wake-on-LAN

z Supports Win 2000, XP, Vista , 7, Linux and Mac

z Supports Linux kernel 2.6.9 and later

z Supports MAC OS 10.4/10.5/10.6 Driver for x86 and Power PC

PAGE 1
USB to LAN (Gigabit) Adapter INTRODUCTION The USB Ethernet Adapter provides users to launch Internet with easy installation and lower power consumption via the USB interface. The adapter is compliant to USB2.0, which contribute to the high compatibility and hence strengthen the brilliant transfer performance. The device is compatible to USB 2.0 and 1.1. Along with complying 802.3, 802.3u and 802.
PAGE 2
SPECIFICATIONS Function Model No. IA-UEC0-00 Port 1 *10/100/1000 Mbps RJ-45 port 1 * USB type A/M Cable Operating System Support Win 2000, XP, Vista , 7 , Linux , Mac Standards USB 1.1/2.0 IEEE802.3 for 10BASE-T IEEE802.3u for 100BASE-TX IEEE802.3ab for 10BASE-T LED Indication Link: Green Activity: Yellow Off: No valid link Input Power BUS power Power Consumption 5V / 200mA(max) Operating temperature 0 ℃ ~ 40 ℃ Storage temperature -20 ℃ ~ 60 ℃ Operating humidity < 80% R.H.
PAGE 3
Class B: FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.