1ft Patio Umbrella User Guide A Item A B C Description finial upper pole with canopy bottom pole B C 1
Table of Contents Description Compatible Bases Assembly & Opening Tilting Replacing Canopy Cleaning & Storage Questions & Warranty 2 Page 3 4 5 6-7 8 9
Compatible Bases The following table shows the minimum weight of umbrella base required. It is recommended to always use a table in addition to an umbrella base.
Assembly & Opening step 1 step 2 1 A 2 B 1. Press the button on the upper pole in. 2. Slide bottom pole onto upper pole until the button clicks into the hole on the bottom pole 4 1. Turn the crank handle clockwise until the umbrella is fully opened.
Tilting step 1 1. Press the tilt button in fully step 2 1.
Replacing Canopy step 1 1. Unscrew the finial at the top of the umbrella 6 step 2 1. Pull the canopy pockets off the frame one rib at a time 2.
Replacing Canopy step 3 step 4 1. Drape the new canopy over the frame 2. With canopy in place, screw finial back on 1. Put the frame ribs back into the umbrella pockets. Take care to not skip any pockets.
Cleaning & Storage cleaning Spot clean with mild soap and water. Allow to air dry. Never use bleach or harsh cleaners. storage Umbrella MUST be used with appropriate base and/or table. See Page 3. Do not leave open umbrella unattended. Store when not in use or during inclement weather. Not recommended for windy conditions.
Questions & Warranty If you have any additional questions or would like to make a warranty claim, contact our customer service department listed below. Customer Service: cs@plantationpatterns.
