User Guide

• if the caller is unknown, unlisted, or blocked

• if your phone doesn't support PBAP

NOTE Cantonese, Danish, Japanese, Korean, Russian and Swedish do not have native language caller

announcement support.

During a call, you can mute the microphone.

Tap the Mute button. You will hear “mute on” confirmation. An alert repeats every 15 minutes

to remind you of microphone mute. Tap the Mute button

again to open the microphone and

hear “mute off” confirmation.

Toggle the Volume button up (+) or down (–) during a call or while streaming audio.

Smart Sensors

™

technology in this headset recognizes if the headset is being worn and can

automatically perform time-saving functions.

Putting on your headset will:

• Answer an incoming call

• Transfer an active call from your phone

• Resume streaming audio

Taking off your headset will:

• Reject an incoming call

• Transfer an active call to your phone handset

• Pause streaming audio

• Lock the Call button to avoid accidental calls

Reset Sensors

You may need to reset the sensors if they are not working as expected.

Test Wearing the headset, tap the Call button to test sensors.

A talk time voice alert means sensors are working. A tone means sensors need to be reset .

Reset To reset the sensors, charge your headset and place on a flat non-metallic surface for

more than 10 seconds.

A 2-second press of the Play/Pause button

will either pause or resume playback of

streaming audio.

NOTE You must pause your streaming audio before you:

• use your headset's voice commands

• initiate an outbound call with your headset (call back or voice dial)

NOTE If you power off the headset or go out of phone range while streaming audio, your headset

will not play/pause the stream upon reconnecting until you manually resume streaming with your

phone.

Mute

Adjust the volume

Use sensors

Play or pause streaming

audio