Manual

NOTE For call control and mute functionality, certain softphones require Plantronics software. See
plantronics.com/software.
1
Load Plantronics Hub software by visiting plantronics.com/software and click on "Download."
2
Connect the headset into the USB port of the computer. The headset will automatically power
on.
3
Check your Audio Settings. Confirm the speaker and microphone settings for your PC softphone
are set to Plantronics 725.
•
PC Audio Setup for Windows 7 and Windows 8
Go to Control Panel > Sound > Playback tab and set the Plantronics 725 device as the Default
Communications Device.
•
PC Audio Setup for Windows XP
Go to Control Panel > Sound and Audio Devices, and in the Audio tab set the Plantronics 725
device for the Sound Playback.
4
Place a call using your softphone software.
ANC will reduce unwanted noise. Slide the switch towards ANC to activate.
1
To place a call
Dial number using your softphone software application.
2
To answer a call
• Put on headset to answer call with Smart Sensor technology or,
• If already wearing headset press the Answer/End button
3
To end a call
Short press the Answer/End button.
Daily Use
Plantronics software
Connect PC and Call
Active Noise Canceling
Incoming/Outgoing Calls
Adjust Your Headset
Volume
7