Voyager Focus UC User Guide
Contents Overview 3 Headset 3 Charge stand 4 USB Bluetooth adapter 4 Connect and pair 5 Connect to PC 5 Configure USB adapter 5 Pair to mobile device 5 Pair USB adapter again 6 Fit and charge 7 Wear on the right or left 7 Charge your headset 7 Check headset battery status Load software 7 8 The basics 9 Make/Take/End Calls 9 Mute/unmute 10 Mute on reminder* 10 OpenMic 10 Volume 10 Play or pause music 10 Track selection 10 Use sensors 10 ANC 11 More Features 12 DeepSleep Mode 12 Answer calls from a seco
Overview Headset ([ ]) ANC Volume up/down Track backward* Play/pause music* Track forward* ANC Active noise cancelling Charge port Active call = mute/unmute Idle = OpenMic (hear your surroundings) Headset LEDs for pairing, battery status, online indicator Call button ([ ]) Power button Bluetooth pair button NOTE *Functionality varies by application. Does not function with web-based apps.
Charge stand USB Bluetooth adapter USB LEDs Red and blue flashes Solid Blue Blue flashes Solid red Purple flashes What they mean Pairing Pairing successful; Connected On a call Mute active Streaming music/media from computer 4
Connect and pair Connect to PC Your Bluetooth USB adapter comes pre-paired to your headset. 1 Insert the Bluetooth USB adapter into your laptop or PC. 2 Pairing is successful when you hear “pairing successful” and the USB adapter LED is solid blue. 3 OPTIONAL: Headset call control Some softphones require the installation of Plantronics Hub for Windows and Mac (plantronics.com/software) to enable headset control (answer/end and mute) functionality.
Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing. NOTE Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter. Pair USB adapter again 1 Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it. 2 Put your headphones in pair mode.
Fit and charge Wear on the right or left To position the microphone on the right or left side, rotate the microphone boom up and over. Adjust the boom so it points to the corner of your mouth. TIP Your headset senses when you change the microphone boom from one side to the other and syncs the audio and controls specific to each side. Charge your headset IMPORTANT Before using, charge the headset fully to reset the accuracy of the talk time prompts.
Load software Some softphones require the installation of Plantronics Hub for Windows and Mac to enable headset control (answer/end and mute) functionality. 1 Install Plantronics Hub for Windows and Mac onto your computer by visiting plantronics.com/ software. 2 Manage your headset settings with your computer or mobile device with Plantronics Hub for Windows and Mac or Plantronics Hub for iOS and Android, respectively (plantronics.com/ software).
The basics ([ ]) ANC Volume up/down Track backward* Play/pause music* Track forward* ANC Active noise cancelling Charge port Active call = mute/unmute Idle = OpenMic (hear your surroundings) Headset LEDs for pairing, battery status, online indicator Call button ([ ]) Power button Bluetooth pair button NOTE *Functionality varies by application. Does not function with web-based apps. Make/Take/End Calls Answer or end a call Tap the Call button.
Voice dial (smartphone) If your smartphone has a voice-enabled assistant, press and hold the Call button for 2 seconds and wait for the phone prompt and then tell the phone to dial the number of a stored contact. Mute/unmute While on an active call, choose: • Tap the red Mute button • Take off/put on your headset while on an active call (requires active smart sensors) Mute on reminder* * Plantronics Hub for Windows and Mac required (plantronics.
• Manage sensors through Plantronics Hub software • Hold both the Mute and Call buttons for more than 4 seconds until the LED flashes purple then red. Repeat to reactivate; the LED flashes purple then blue. NOTE Sensors cannot be disabled while streaming audio. ANC Active Noise Cancelling (ANC) reduces unwanted noise. Your headset ships with ANC on. To turn ANC off, slide the stitch away from "ANC.
More Features DeepSleep Mode If you leave your headphones powered on but out of range of your paired phone or USB adapter for more than 7 days, your headset conserves its battery power by entering into DeepSleep mode. Once back in range with your phone or USB adapter, press the Call control DeepSleep mode. Answer calls from a second device button to exit It's easy to answer calls from two devices (including softphone).
What's in the box Headset Bluetooth USB Adapter Accessories Base Carrying case Micro USB cable Sold separately at plantronics.com/accessories.
Troubleshoot The headset sensors are not working as expected. • A call is not automatically answered when I put on my headset. If your headset sensors are not working as expected, you may need to reset the sensors. See Reset sensors. • Mute/unmute is not working when I take on/off my headset during a call. • During a call, mute unexpectedly turns on. During a call, nobody can hear me. Configure the headset as the recording/output default device.
Support NEED MORE HELP? plantronics.com/support Plantronics, Inc. Plantronics BV 345 Encinal Street South Point Building C Santa Cruz, CA 95060 Scorpius 140 United States 2132 LR Hoofddorp, Netherlands © 2015 Plantronics, Inc. Plantronics and Simply Smarter Communications are trademarks of Plantronics, Inc., registered in the US and other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license.
