Security Datasheet

(b)For a lithium alloy battery, the aggregate lithium content is not more than 2 g, and for a lithium-ion battery,
the watt-hour rating is not more than 100Wh.
(c)Each cell or battery is of the type proved to meet the requirements of each test in the Manual of Tests and
Criteria, PartⅢ, sub-section 38.3.
Test content Series Standard requirement
Altitude Simulation 38.3.4.1
Cell and battery shall no leaking, venting, disassembly, rupture or fire. The open circuit voltage of test cell or
battery shall not be less than 90% of the pre-test voltage after testing. The voltage requirements do not apply
to test cell and battery in a fully discharged state.
Thermal Test 38.3.4.2
Cell and battery shall no leaking, venting, disassembly, rupture or fire. The open circuit voltage of test cell or
battery shall not be less than 90% of the pre-test voltage after testing. The voltage requirements do not apply
to test cell and battery in a fully discharged state.
Vibration 38.3.4.3
Cell and battery shall no leaking, venting, disassembly, rupture or fire during and after the test. And the open
circuit voltage of each test cell or battery in the third perpendicular mounting positions shall not be less than
90% of the pre-test voltage after test. The voltage requirements do not apply to tested cell and battery in a
fully discharged state.
Shock 38.3.4.4
Cell and battery shall no leaking, venting, disassembly, rupture or fire. The open circuit voltage of test cell or
battery shall not be less than 90% of the pre-test voltage after testing. The voltage requirements do not apply
to test cell and battery in a fully discharged state.
External Short Circuit 38.3.4.5
Cell or battery case temperature does not exceed 170°C. During test and within 6 hours after test, there shall
be no disassembly, rupture or fire.
Impact ( applicable to cylindrical cells not less than 18mm in diameter)
Cell or battery case temperature does not exceed 170°C. During test and within 6 hours after test, there shall
be no disassembly, rupture or fire.
Crush(applicable to prismatic, pouch, coin/button cell and cylindrical cell less than 18mm in diameter.)
Cell or battery case temperature does not exceed 170°C. During test and within 6 hours after test, there shall
be no disassembly, rupture or fire.
Overcharge 38.3.4.7 During the test and within 7 days after the test, The charged battery shall be no fire or disassembly.
Forced Discharge 38.3.4.8 During the test and within 7 days after test, original or charged battery shall be no fire or disassembly.
Impact/Crash Test
38.3.4.6
===========================================================================
15. Regulatory Information
===========================================================================
See ACGIH exposure limits information as noted in Section 3.
US: This MSDS meets/exceeds OSHA requirements
International: this MSDS conforms to European Union (UN), the International Standards Organization (ISO)
and the International Labor Organization (ILO) and as documental in ANSI (American National Standards
Institute) Standard Z400.1-1993.
===========================================================================
16. Other Information
Reference:
 Chemical substances information: Japan Advanced Information center of Safety and Health International
Chemical Safety Cards (ICSCs): International Occupational Safety and Health Information Centre (CIS)
 2002 TLVs and BELs: American Conference of Governmental Industrial Hygienists (ACGIH)
 2021-2022 Edition of the ICAO Technical Instructions for the Safe Transport of Dangerous Goods by Air
(Technical Instructions) and the 63rd Edition of the IATA Dangerous Goods Regulations (DGR)